Atomos adds 8K ProRes RAW recording to the Canon EOS R5, 5.9K ProRes RAW to the Panasonic BS1H and more: Digital Photography Review


Atomos has announced an update for the Ninja V and Ninja V+ that brings new ProRes RAW recording options to Canon’s EOS R5 and Panasonic Lumix BS1H and older Sony FS series cinema cameras. AtomOS version 10.71 also adds support for the new AtomX Cast devices from Atomos with the Ninja V+.

Canon EOS R5

In the Canon EOS R5 mirrorless camera, AtomOS version 10.71 adds the ability to record up to 5K/30p (5088 x 2680 pixels) ProRes RAW on the Ninja V and up to 5K/60p or 8K/30p PreRes RAW on the Ninja V+ . The update also adds slider adjustments for white balance and ISO controls in Final Cut Pro X. Interestingly enough, these recording modes with the EOS R5 have so many caveats that Atomos specifically takes the time to mention.

First, if you play the recording via the camera’s record button, you’ll be limited to the recording time limit of 29:59 minutes, while if you play the recording on the Ninja V/V+ screen, you won’t have that limit. Atomos also suggests using the EOS R5’s “Standby: Low Resolution” mode when recording RAW for extended periods of time to ensure you get the maximum recording time possible. Atomos also notes that the Ninja V’s screen and cover will get very warm while recording 5K ProRes RAW and says that although the unit is designed for this and has safety features to prevent overheating, you may want to be careful when using the device in areas with ambient temperatures High.

Here is a list of the standard time limits for the EOS R5 when used with the Ninja V, based on storage space:

• 1 TB @ 5K30 ProRes RAW HQ: 45 Minutes

• 1 TB @ 5K30 ProRes RAW: 61 Minutes

• 500 GB @ 5K30 ProRes RAW HQ: 22 Minutes

• 500 GB @ 5K30 ProRes RAW: 30 Minutes

Panasonic Lumix BS1H

In the Panasonic Lumix BS1H box camera system, AtomOS version 10.71 offers new and improved shooting modes when paired with both the Ninja V and Ninja V+, as well as slider adjustments for white balance and ISO controls in Final Cut Pro X. Below is a list From ProRes RAW recording modes with both the Ninja V and Ninja V+ when connected to the Lumix BS1H via HDMI:

• 5.9K (5888 x 3312) with a resolution of 23.98 pixels, 25 pixels, 29.97 pixels

• 4.1 KB (4128 x 2176) with a resolution of 23.98 pixels, 25 pixels, 29.97 pixels, 50 pixels, 59.94 pixels

• 3.5K anamorphic (3536 x 2656) at 23.98 pixels, 25 pixels, 29.97 pixels, 50 pixels, 59.94 pixels

Sony FS . series

Finally, AtomOS version 10.71 adds a slew of new shooting modes to six of Sony’s FS series camera systems when paired with the company’s new Ninja V+ monitor/recorder with the included SDI unit. Here is a breakdown of the new recording modes for each of the six cameras:

Sony FS5 (with RAW upgrade) / FS5 II

• 4K (4096 x 2160) at 24p, 25p, 30p, 50p, 60p, 100p, 120 p o 2K (2048 x 1080) at 100p, 120p, 200p and 240p

Sony FS700 (with RAW upgrade) / FS700R

• 4K (4096 x 2160) at 24p, 25p, 30p, 50p, 60p, 100p, 120 p o 2K (2048 x 1080) at 100p, 120p, 200p and 240p

Sony FS7 (with XDCA-FS7) / Sony FS7 II (with XDCA-FS7)

• 4K (4096 x 2160) at 24p, 25p, 30p, 50p, 60p

• 2 KB (2048 x 1080) at 24p, 25p, 30p, 50p, 60p, 100p, 120p, 200p, 240p

Atomos clarifies the asterisks above, saying “4K is available at 100/120p in S&Q burst mode which is buffered into the camera and output as a 60p signal.”

AtomX cast

The AtomoOS 10.71 firmware update also makes it possible to use Atomos’ new AtomX Cast devices with the new Ninja V+ monitor/recorder, turning it into a powerful live streaming solution. Here is a list of other improvements that the firmware update brings to AtomX Cast when paired with both the Ninja V and Ninja V+:

• Introducing “Dip to” – transitions available in black and white. It can be applied automatically to each key from one entry to the next.

• Adding options for recording the updated program. Choose “Clean” to record a clean feed of the current switch to the input or use the new “CAST Program” mode. In CAST Program mode, graphic and Picture-in-Picture (PiP) overlays are recorded to the SSD/HDD included in the Ninja V. The recording contains new “Dip to” transitions as well as Fade In / Fade Out buttons used to fade or fade out of the program during recording.

• Interlaced bookmarks are now supported. An automatic drop-down conversion is applied to them, which then corresponds to the project rate.

• Audio delay options are now available, which apply frame delays to all audio inputs including analog and embedded audio (calibration feature not supported).

• General bug fixes.

You can download AtomOS firmware version 10.71 for Ninja V and Ninja V+ on the Atomos product support page and learn all the new tips and tricks through our various setup guides on the Atomos YouTube channel.



Source link

Share:

Leave a Reply

Your email address will not be published. Required fields are marked *

GIPHY App Key not set. Please check settings